Paving Techniques and Conservation of Ceramic Tile

Profile of Ceramic Floor Tile

About the size of wall and floor tiles, on the general units, bathroom floor tile size is generally about 300 mm × 300 mm, the kitchen floor tiles should be about 500 mm × 500 mm. In addition, the floor tiles must pay attention to its anti-slip properties. Different from the common floors, the ceramic tile supplies are generally difficult to accurately calculate, since the factors to decide supply numbers are relatively complex, but factors are mainly the following four aspects: the wall, the degree of ground rules. The more irregular of the surface, the more the loss of ceramic floor tile; Second, the tile size, the larger the tiles, the more wear and tear of the tiles; Third, quality of the tile. Tile worse of the tile quality, the more wear and tear; the last, paving way, non-integer tiles between the seams are required to use the edge of the tile on the big (but beautiful) docking loss. Corner to avoid an overly narrow brick bar with two interception loss (but beautiful). The overall oblique tiling is certainly better than the straight shop big loss (and the results are not necessarily beautiful).

Ceramic Tiles Classification

The ceramic tiles are the art crystallization of fire and earth. If you want to understand the ceramic tile flooring, first you have to know what the ceramic tile is and its classification. Ceramic floor tiles are made from clay or other inorganic non-metallic materials, after forming, sintering Process made for decoration and protection of buildings, structures, walls and floor plate or lump ceramics. Ceramic decorative bricks, ceramic tiles can also be referred to as collectively, can be broken down into 22 sub-items. Specific classification: porcelain tiles, stoneware tiles, fine stoneware tiles, stoneware tiles, ceramic tiles, extruded brick, dry-pressed ceramic tiles, wall tiles, exterior wall tiles, indoor tiles, outdoor tiles, glazed tiles, unglazed tiles, flat decorative bricks, the main decorative bricks, ceramic mosaic tiles, square tiles, accessories, bricks, tiles, seepage tile and split brick.

Maintenance of Ceramic Floor Tiles

1. Use the soapy water with a small amount of ammonia to clean the tile, and it can be polished shiny bright. 2. Use with a little linseed oil rag, wipe the mud ceramic tile. 3. Take the same amount of linseed oil and turpentine mix thoroughly, you can both use it to wipe the stains on the ceramic tiles, but also make the tiles to maintain a good finish. 4. When there is little minor scratches in the polished ceramic tile surface, toothpaste can be applied to the scratches around force repeatedly wipe with a dry cloth, and then coated with wax oil with a cloth. 5. If the tiles are polished ceramic tiles or other smooth surface ceramic bricks, if permission, it is recommended that every two or three months for waxing maintenance, with a special floor wax (wax or car 99) to make it remain bright as new.

This article is come from:http://www.chinawoodenflooring.com/index.php/paving-techniques-and-conservation-of-ceramic-tile.htm