Tuesday, September 11, 2012

Basic Introduction of Labeling Machine

What is Labeling Machine?

The labeling machine (labeler) is a kind of common equipment used in various industries to paste the adhesive label of paper or metal foil on the packaging containers. When the sensor sends a signal labeling materials for the preparation labeling, the drive wheels on the labeling machine begins to rotate. Since the roll label in the apparatus is on the tensioned state, and when the run of the bottom paper close to the release sheet to change direction, the label has certain firmness due to its material, the front end being forced detachment prepared labeling. The labeling objects are exactly located in the label lower portion, under the action of the labeling wheel, to achieve synchronization labeling. After labeling, roll label below the sensor signal stop running, the driving wheels is in a quiet state, the whole labeling cycle comes to the end.

Automatic Non-dry Sticker Labeling Machine

The automatic non-dry sticker labeling machine is suitable for the labeling of pharmaceutical, food, light industry and daily chemical industry, round plastic bottles, glass bottles and similar objects. The machine can automatically complete the sub-bottle label transmission with sync separator labels, stickers and automatically print batch number, clear handwriting. Because the labeling machine uses the mechatronics technology, uses the choice of the high torque stepper motor drive, and the advanced systems of Japan photoelectric control device and power protection, the overall sensitivity is very high, low-speed torque, speed is stable, strong anti-jamming capability, operating voltage and other technical characteristics. It can ensure accurate labeling, labeling machine stable, reliable and efficient. Highly guarantee the accurate labeling, stable, reliable and efficient.

Mechanical Supplies of Labeling Machine

The main function of labeling equipment is to label for various commodities, therefore, it has certain requirements for supplies label materials and textures. The general labeling machine has some requirements for labels as follows. Surface material: The firmness of the label is out of the subject is the key, and therefore it requires a certain strength and hardness of the surface material, the label firmness has relation to the material thickness and the area of the label, so when use a flexible film material, it should be appropriate to increase the thickness, generally it is controlled at 100μm or more. A thin sheet material, such as the 60 ~ 70g/m2 labeling paper, it is generally not suitable for big label, but suitable for processing into small labels, such as the price tag on the pricing gun. The firmness difference will lead to labeling labels not marked, or label with backing paper with rewinding, thus making the automatic labeling failure.

This article is come from: http://machine.china-fillingmachine.com/labeling-machine/basic-introduction-of-labeling-machine.htm

No comments:

Post a Comment