Thursday, August 23, 2012

Advice for Installing LED Tube Lamp

Why Need LED Tube Lamps

You can save huge energy bills if you decide to install led tube lamps or t8 led tube lights, and you would get potentially hazardous fluorescent lights out of your house or office. But you may find that there are numerous led tube lamps or t8 led tube lights in the market which cannot be installed directly on your existing fluorescent fixture, so you may have to do some minor modifications on the fixtures so as to properly install the bulbs. It is rather easy for you to install led tube lamps or t8 led tube lights on the existing fluorescent fixture. Moreover, you can choose to buy some fixtures specially designed for the led tube lamps or t8 led tube lights in the coming future, and they may be much cheaper than similar fluorescent fixtures. Here we would like to give you a full picture on what exactly you should know to set up the new energy-saving fluorescent tube lights for the existing fluorescent lighting fixture.

Tips for Installing LED Tube Lamp

Ensure the substitute led tube lamps are the correct size for your fixture. Besides, always keep in mind that when servicing a fluorescent fixture or lamp for any reason, electrical energy to the whole fixture ought to be disconnected. This can be not often practical in cases when a large amount of fixtures are managed from the same power control (in open workplace areas for example). In these instances, insulating gloves as well as a nonmetallic ladder should be utilized if the fixtures have to be serviced if the power is present. You will need some simple equipment, such as a wire cutter and wire stripper (generally integrated into the exact same tools), a pair of pliers, a screwdriver, as well as a number of wire nuts for reconnecting the wires when you have the ballast removed.

Other Notes You have to Focus on LED Tube Lamp

You had better leave long enough wires leading out of the ballast so as to connect the ballast with the wire nuts again according to the number of the wires you have to work with, in the case that you ever want to convert the fixture back to apply the fluorescent bulbs instead of led tube lamps or want to utilize the ballast at some places else. Generously speaking, there are two screws or bolts for the ballast to hold in right places on the fixture. With a screwdriver or a pair of pliers, they can be removed. According to the local regulations, you have to dispose of the ballast just like the old fluorescent bulbs. You should treat the fluorescent bulbs as the hazardous waste and deal with it properly due to small amount of the highly-toxic mercury they may contain.

This article is come from: http://kitchencabinet8.com/?p=4

No comments:

Post a Comment