Proper Use of Aluminum Equipment

The basic conditions for the rational use of equipment: equipping enterprise production process characteristics and the actual needs of its supporting, reasonable layout and coordination; production tasks are based on the performance of the equipment, load bearing capacity and technical characteristics, arrange equipment operator; choose with a qualified operator; develop and implement the use and maintenance of cnc cutting machine and regulations, including a series of rules and regulations to ensure the technical information to use and maintain the equipment according to the equipment; give full play to ensure that equipment performance objective, including the necessary protective measures and moisture-proof, anti-corrosion, dust-proof, shock-proof measures; establish and implement the responsibility system for use of equipment. Equipment management, is based on these basic conditions, from the signing of the contract with the supplier of the equipment until it is out of production, through planning, organizing, education, supervision, and a series of measures to reduce wear and maintain the equipment should the accuracy technical performance and production efficiency, extend the life of the equipment often in good technical condition, the best economic results.



Reasonable production departments with equipment premise is correct, rational use of equipment, which gives full play to the performance and improve the use of effects. Reasonably equipped enterprises should be based on production capacity, production, nature and direction of enterprise development, equipped according to the actual needs of the product technology requirements and selection of equipment. In the selection of equipment, we should pay attention to the following points:

1. We should consider the complete sets of production equipment and auxiliary production equipment. Otherwise, it will cause incompatible devices, resulting in uncoordinated production arrangements, affecting the normal production.

2. Equipment with the performance and economic efficiency should be coordinated with the change of crimping machine structure, changes in the variety, quantity and technical requirements, as well as new technology, the promotion and application of new materials, various types of equipment with proportion should be adjusted to adapt.

3. In the process of equipping and we should avoid the pursuit of "large" and "small". Comprehensive planning, balance, and the implementation of the various units of equipment capacity within a business, to play the biggest role of the equipment and the highest utilization effect as a starting point as possible concentrated rather than dispersed.

4. If we can take the use of existing equipments to modify or make the fixture innovations in some special equipment, and we need do not purchase a dedicated device.

5. In the equipments, we should pay attention to improve the adaptability and flexibility of the device processing technology to meet the need of the products with many varieties, small batch and short production period.

www.aluminum-machine.com is also the first company to develop such kind of products and its matching products are complete. In addition, its main products are the processing equipment of aluminum alloy metal doors and windows, plastic steel window and door, curtain wall, aluminum composite panel and various punching machine. Furthermore, it can design and make various non-standard equipment and molding tools according to custmers' different needs.

Technical advantages of Aluminum Laser Cutting Machine

Metal laser cutting machine is the use of the principle of laser thermal cutting metal or plate. In design, R & D personnel constantly optimize the numerical control system, so that it could better meet the increasing precision parts machining; designed cnc cutting machine system dynamic stability, and long time with the work.

Laser cutting machining processes

Laser cutting is a more complex process, which involves a lot of factors to carefully check the contents before cutting, and we have to observe monitoring. Laser cutting professional computer-aided numerical control programming software, preparing the part program is generally completed in the offline computer. Some simple processing procedures can also be done in the editing interface of the CNC system, but it takes a long time and cannot carry out the complex parts programming nesting. Generally do not advocate for the preparation of the CNC program in the CNC system, because it will take up a lot of machine usage time, and inefficient. After the sheet is placed on the machine table, the important task is to determine the coordinates of the machining of the workpiece, and the coordinate system should be set with the CNC programming coordinates completely consistent.



The advantages of aluminum laser cutting machine

The laser has four major characteristics of high-speed, high directivity, high monochromatic and highly coherent. After aggregation, the laser beam passes through the guide to the high energy density in the industry has a wide range of applying a laser beam for cutting, crimping machine, welding, metal material surface-modified (phase transformation hardening, coating, dissolving condensate and alloying) and rapid prototyping.

Laser cutting machine laser processing industry is the most important application of technology, it accounted for more than 70% of the laser processing industry, you can see, laser cutting machine technology will revolutionize the sheet metal processing technology. Laser cutting compared with other cutting, the biggest difference is that the characteristics of the cutting speed high-precision and high adaptability. Laser can cut carbon steel, stainless steel, aluminum, copper, wood, plexiglass, ceramic, rubber, plastic, quartz glass and other metallic and non-metallic materials, laser cutting machine also has a slotted fine, small heat-affected area, the quality of the cut surface no noise cutting, the cutting process is easy to automate control advantages.

Laser cutting the sheet, the need for a mold, can replace some of the need to use complex and large abrasive punching method, can greatly shorten the production cycle and lower the cost, in addition, has a curved contour parts on some or many parts of the feature pattern, the laser cutting especially advantageous, therefore, laser cutting machine should be widely used in many industrial sectors of the electrical switches, household appliances, textile machinery, engineering machinery, metallurgical equipment, automobile manufacturing, medical equipment, food machinery and other sheet metal processing industry.

www.aluminum-machine.com takes the "Kingtool Machine, Professional Quality" as the principle, the "Realistic and Innovative, Solid and Enterprising" as guideline, the "Strive for prosperity, Contribute to the society" as spirit, and "Help customers to choose satisfied product." as tenet. In the foundation of firmly grasp the product quality, it not only provide professional before service, service during sale and after sale service for custoemrs, but also provide industrial information freely.

Five Cases in the Selection of CNC Cutting Machine

First, cutting accuracy

For the construction industry, the general cutting requirement is less than 0.5mm; the requirement on the car mirror is less than 0.01mm and the cutting thick of steel plate should be as thin as possible. Now the cutting accuracy provided by various machinery manufacturers is generally less than 0. 2mm, but it cannot be judged by the introduction of the product manual, and there should be a complete set of test procedures to test the cutting accuracy in the acceptance, to measure the actual cutting accuracy, we generally have a dozen test sample surfaces. We can completely control the flatness of the cutting platform, control system and the synchronization level and crimping machine according to the test.

Second, the cutting speed

We cannot talk about the speed until we can meet the cutting precision, due to the cutting platform is short, it is difficult to judge whether it is the highest speed with eyes. So we can take advantage of the cutting machine servo drive with software simulation function to see whether the speed of the motor is at the highest speed. Each axis can be tested separately, but also can be tested simultaneously.

Third, the automation of cutting machine

At the edge of the CNC cutting machine, considering processing costs and the special types of volumes chip, which requires the operation of cutting machine is simple, easy to understand and not too complicated, otherwise it will cause the embarrassing situation that we can afford the machine but cannot feed the machine, such as bending machines for sale. So the manufacturers should make some researches to find out the easy and high-efficient operation mode.

Fourth, easy maintenance
The signal and the mechanical sensors are unnecessary to be equipped to much, and the switches and indicator lights should be as less as possible, because the fault in a mechanical device will affect the use of the cutting machine, and the fewer parts will bring low probability of fault, in addition, the small number of lines is convenient to find fault and replace the parts, so it is the best that will be able to debug the I / 0 signal state on the screen. The maintenance cost is a important factor that should be considered in the purchase of machinery.

Fifth, save energy
We should select the cutting machine with less energy consumption when they can complete the requirements of the same cutting size, and which will bring many benefits to the enterprise. First, protect the environment, save energy; second, save the daily expenses.

www.aluminum-machine.com is an integrative enterprise of R&D, production and management. It is a director unit of China Building Metals Construction Association of Ministry of Construction and became the profession standard drafter of national aluminum processing in June,1998. Furthermore, its product have gained the honor of "Chinese Famous Product".