Profile of Glass Drilling Machine

Introduction of Glass Drilling Machine

Glass drilling machine is the machine designed for glass drilling, drilling large diameter base overhang large vacancy, it can be used to process large-size glass table, low height, easy to operate, under the drill pressure governor, speed and stability, effectively improve the processing performance. This machine has high production efficiency, and it can be used in mass production and assembly-line. Just as the glass edging machine, glass drilling machine is the indispensable machinery and equipment in the production of glass processing.

Glass Drilling Machine Features

The latest glass drilling machine uses the automatic control design, pneumatic clamping glass to feed hydraulic cushioning technology, free to adjust the automatic drilling time and speed up and down the drill up and down the drill has nesting drilling. The table adopts pneumatic lift with activities positioning and automatic feeding device, it is faster and more accurate positioning of the batch processing glass work piece. The product is divided into automatic and manual two options.

Use of Glass Drilling Machine

When drilling glass, the lower drill is easy to crush the glass, so when drill thin glass, the pressure must be adjusted very low, may vary within a range of 0.18 ~ 03MPa to drill the thick glass, the pressure can rise to 0.46MPa about. Before the start of class work, the lubricant should give each oiling parts and check the belt tension level on the drill shaft operation with or without abnormal, drill bit wear until everything is functioning properly before they start work. Splice drawer in the core material should be cleaned, or the accumulation of material core too will be stuck catcher. Especially when the drilling diameter is greater than 100mmj big hole, when drill several holes it should be cleaned once. Clean up the core material should be the catcher position is then expected to Splice drawer smoothly drawn, clean up the core material on the drill starts rotating, the catcher is in the position of the then expected, so it is easy to clean material core.

Glass Drilling Machine Precautions

Commissioning and use of attention should be safe, do not touch moving parts and the live parts when the machine starts; tools and other objects not on the conveyor rails and cast; emergency, immediately press the emergency stop button or pull down the air switch; ready sufficient amount of cooling water to keep the tank clean water, to avoid burning the grinding wheel and glass, and promptly clean up the grinding impurities out of the water pipeline to keep waterways open; should check the trip switch is working properly before class grinding work to control whether the direction of correct as incorrect, control in the wrong direction, should immediately stop checking, otherwise the machine will have fatal damage; less than or equal to the ambient temperature of +50 °C motor temperature.

This article is come from:http://machine.china-fillingmachine.com/glass-machine/profile-of-glass-drilling-machine.htm