Introduction Of LED Spot Lighting

The design of a LED spotlight LED bulbs is a type of directionality. They are used to illuminate a specific area for general lighting or prominent decorative objects.

12V 50W halogen spotlight to millions of homes and businesses in Australia found that most people are familiar with. The most common LED spotlights are 50mm in diameter and come in two base types. MR16 spotlights 12 volts, and therefore need a 12V transformer run. GU10 spotlights on the run, which means that it runs at the same power supply 240V light bulb as a normal power supply in Australia.

There are other bases, LED spot lighting, standard screw and bayonet base. These bases are far less common in the spotlight category than the two mentioned above.

The most common color of 3000 Kelvin (warm white) LED spotlights. This is the same color as halogen. However, LED spotlight is also available in natural white and daylight.

A 9W or 10W LED spotlight can replace 50W halogen. 6 watts can replace a 35W halogen lamp and a 3W or 4W LED 7W can replace 20W halogen spotlights. The new chip package (COB) LED spotlights 9w = 50W halogen replacement.



The average working life of a 50W halogen spotlight for 3000 hours need to be changed 16 times compared lamp replacement LED spotlights.

If you have a constant illumination of the commercial building maintenance is a problem, you'll know what we're talking about. Employee complaint hotline, they are common, the increase in the cost of air-conditioned, the halogen spotlights because 90% of the heat loss. This means that your halogen lighting circuit power consumption is only 10% expressed as "light".

Compared with this, LED spotlight, more than 90% of the energy consumed is represented as light, and less than 10% of the hot dispersion is lost. This reduces the heat loss, and can also save the power of the air conditioning, because the temperature in the whole room can be significantly reduced.

Of course, the same also applies to the domestic home lighting. Down lights 50W halogen amazing popularity of store, came to the same environmental impact, the desire in our homes. Outdoor LED light bulbs can produce the same effect of reducing the electricity bill of 80% of electricity and a significant improvement of the quarter. In addition, the light from the LED spotlights clarity obvious than halogen.

When upgrading to LED spotlights important information:

Standard halogen spotlights, LED spotlights, a significant difference in 12V AC transformer AC 12V MR16 halogen spotlights run. A LED spotlight prefers a 12v DC (direct current) transformer. This can cause compatibility issues if people are not aware of the difference. Keeping your existing fixture with a MR16 LED spotlight would require changing to an LED transformer if replacing MR16 halogen spotlights. In addition, you can replace the fixture, rather than a GU10 LED spotlight. The reason you have to change the fixture is because all mains voltage metal light fixtures have to be earthed by law. MR16 12V connector is not grounded, because they are low voltage and by transformer isolation.

www.progressive-hk.com was founded in 2007 as a professional manufacturer of LED Indoor & Outdoor Lighting Products. Including all kind of LED lights as LED Tube, LED Bulb, LED Downlight, LED Spotlight, LED Street Light, LED Garden Light, etc.

This article is come from:http://www.chinaphoneparts.com/index.php/introduction-of-led-spot-lighting.htm

Advantages of LED Spot Lights

An LED spot light lamp (or LED spot light bulb) is a solid-state lamp that uses light-emitting diodes (LEDs) as the source of light. An LED chasing light, long life and high energy efficiency, but the initial cost is slightly higher than those of fluorescent lamps and incandescent lamps.

Chemical decomposition of LED chips reduces luminous flux over life cycle as with conventional lamps. The LED spot lighting can be used interchangeably with other types of lamps. The General Assembly's high-power light-emitting diode can be used to replace incandescent or fluorescent. The LED spot lights are the same base, so that they directly interchangeable with incandescent bulbs. LED flood light for general and special purpose lighting.

What makes these lamps better than the usual types of lamps?

Compared to fluorescent bulbs, the advantages of outdoor LED light bulbs claimed that they contain compact fluorescent or mercury-free energy-saving lamps do. In addition, they also open the moment, and that life is a loop through open and closed, so they are very suitable for lamps bulbs often open and close. They are also mechanically robust, and most other artificial light source is fragile.



Currently, the use of incandescent bulbs and fluorescent lamps as a light source is the older, conventional gas the vacuum light source and poor reliability and durability and low luminous efficiency. In the past electric circuits are made of bulky glass vacuum tubes in spite of poor reliability and durability.

The LED ceiling Distribution spinning high-purity aluminum reflector, this may be the narrow or wide beam angle control. LED ceiling reproductions obtain good uniformity and reduced glare, the complete photometric inspection data backup performance.

Suitable for just about any broad assortment of applications, and both a light or silver-grey bezel finish. LED ceiling light with a diameter of 95mm, and has the potential to provide a fixed output or dimming drive, use the same plug and socket connection fast and quick installation of the equipment of the soul.

www.progressive-hk.com is a professional manufacturer of LED spot light with many years experience. It is a leading supplier in China.

This article is come from:http://www.storage-battery.com/index.php/advantages-of-led-spot-lights.htm