Technology and Innovation of the Glass Machinery Industry

With China's rapid economic development and people's increasing living standards, we put forward higher production requirements and quality standards for industrial applications and consumer glass products. China, as a glass of mineral resource-rich countries with a high technical level of labor, has a huge market for the glass products export. From the early introduction of digestion to the manufacture conventional equipment, China glass machines has experienced 40 years of development, has been facing improve product productivity, but also has faced the world quality challenges.

Huge Development Potential for the Glass Machinery Industry in China

Glass deep processing industry has the good prospects and also development will remain a high-speed source for the development of glass machinery manufacturing industry in China, glass machinery industry in China has huge development potential, enough stamina, especially in the high scientific and technological content, good performance, and the price is relatively better than the imported equipment models, such as the production of multi-room flat laminated glass flat presses and bent laminated glass continuous bending furnace, there are good prospects for development of the glass machine, such as glass edging machine.



The state quo of China's glass machinery

Today's increasingly demanding high quality glass products, processing technology in addition to considering different material properties must also achieve a more sophisticated, delicate and pure processing results, and innovative laser cutting technology has become in many industries glass cutting standards. Cutting means of the traditional glass with carbide or diamond cutter, and are widely used for many applications, the cutting process is divided into two steps. First glass with a diamond tip or carbide grinding wheel in the surface of the glass have a crack;, the next step is to use mechanical means to separating the glass along the crack line. However, there are also scribing and cutting some flaws in the use of this method. Removal of material causes the debris fragments, and the generation of micro-cracks, so that the reduction in strength of the cutting edge, and thus the need for a cleaning step. Deep cracks brought about by this process is not usually perpendicular to the glass surface, the reason is that the mechanical force generated by the dividing line generally non-vertical. Moreover, the glass yield loss caused by the mechanical force is also a negative factor.

www.glass-machine.com developed himself as a professional glass machinery manufacturer which is capable of design, machining, and assembly on the basis of 20 years experience in precision machining of glass machine, woodworking machine through unwearied innovation. Since the establishment in 2004, We have gained a series of honors to meet our progress and have won the recognition of the industry.

This article is come from:http://machine.china-fillingmachine.com/glass-machine/technology-and-innovation-of-the-glass-machinery-industry.htm

Introduction of Glass Edging Machine

Glass processing equipments are based on PSA technology design and manufacture of nitrogen occurred equipment. Generally used in the adsorption tower of the two parallel, strict control of the specific sequence of a programmable automatic control system, the alternating adsorption pressure and regeneration extract the complete separation of the nitrogen and oxygen to obtain the desired high purity nitrogen. Nitrogen effects: as a raw material air, the use of l, which will in the separation of oxygen and nitrogen obtained physical methods. There are three sectors, i.e., the cryogenic air separation method, molecular sieve air separation method (PSA) and membrane air separation method.

Glass cutting machine, with small diesel or gasoline powered, light weight, small size, simple structure and so on. Micro-farming machine is widely used in the plains, mountains, hills, dry land, paddy fields and orchards. Can be coupled with appropriate pumping equipment, power generation, spray, also suitable for short-distance transport towing a trailer, tiller free exercise in the area, and stored in a user-friendly, without large-scale agricultural glass machinery cannot enter the mountain terraces trouble is the best choice to replace cattle farming, the majority of farmers consumers.

Lights, glass edging machine, ceiling fan installation quality management, according to the "Construction Quality Acceptance unified standard" GB50300-2001, "Electrical Building Engineering Construction Quality Acceptance" GB50303-2002 standard, suitable for indoor and outdoor electric lighting, single-tube lamps installed ceiling fans. Does not apply to special places, such as mining, shipbuilding and other places is suitable for indoor and outdoor electric lighting fixtures and ceiling fans installed electric lighting and ceiling fans installation. It does not apply to special places, such as mines, ships and other places of electrical lighting and glass production line installation.

The traditional tomb, glass edging machine beautiful lighting, or the works offered the palace, elegant shape, reflected the current mainstream aesthetic fashion. Many of us there are several interesting lighting design. They are generally more simple workmanship, style generally surprising an Department, the performance inside general public's aesthetic preferences, Grinding machine production line and function requirements.

www.glassmachine8.com is a professional glass machinery manufacturer in China. With cutting edge technology and strict quality control, our machines has passed the ISO9001:2000 Quality Control System Certificate and got CE Certificate.

This article is come from:http://www.gazoviepliti.info/glass-machine/introduction-of-glass-edging-machine.htm

Profile of Glass Drilling Machine

Introduction of Glass Drilling Machine

Glass drilling machine is the machine designed for glass drilling, drilling large diameter base overhang large vacancy, it can be used to process large-size glass table, low height, easy to operate, under the drill pressure governor, speed and stability, effectively improve the processing performance. This machine has high production efficiency, and it can be used in mass production and assembly-line. Just as the glass edging machine, glass drilling machine is the indispensable machinery and equipment in the production of glass processing.

Glass Drilling Machine Features

The latest glass drilling machine uses the automatic control design, pneumatic clamping glass to feed hydraulic cushioning technology, free to adjust the automatic drilling time and speed up and down the drill up and down the drill has nesting drilling. The table adopts pneumatic lift with activities positioning and automatic feeding device, it is faster and more accurate positioning of the batch processing glass work piece. The product is divided into automatic and manual two options.

Use of Glass Drilling Machine

When drilling glass, the lower drill is easy to crush the glass, so when drill thin glass, the pressure must be adjusted very low, may vary within a range of 0.18 ~ 03MPa to drill the thick glass, the pressure can rise to 0.46MPa about. Before the start of class work, the lubricant should give each oiling parts and check the belt tension level on the drill shaft operation with or without abnormal, drill bit wear until everything is functioning properly before they start work. Splice drawer in the core material should be cleaned, or the accumulation of material core too will be stuck catcher. Especially when the drilling diameter is greater than 100mmj big hole, when drill several holes it should be cleaned once. Clean up the core material should be the catcher position is then expected to Splice drawer smoothly drawn, clean up the core material on the drill starts rotating, the catcher is in the position of the then expected, so it is easy to clean material core.

Glass Drilling Machine Precautions

Commissioning and use of attention should be safe, do not touch moving parts and the live parts when the machine starts; tools and other objects not on the conveyor rails and cast; emergency, immediately press the emergency stop button or pull down the air switch; ready sufficient amount of cooling water to keep the tank clean water, to avoid burning the grinding wheel and glass, and promptly clean up the grinding impurities out of the water pipeline to keep waterways open; should check the trip switch is working properly before class grinding work to control whether the direction of correct as incorrect, control in the wrong direction, should immediately stop checking, otherwise the machine will have fatal damage; less than or equal to the ambient temperature of +50 °C motor temperature.

This article is come from:http://machine.china-fillingmachine.com/glass-machine/profile-of-glass-drilling-machine.htm

Opportunities and Challenges of Glass Machinery

Comparison between flat glass and container glass development

The glass industry is generally divided into plate and utensils bottles according to the space form of the glass products (it seems more appropriate that it is hollow glass in the overseas market). The mounting of flat glass come from behind, which brought the glass industry to an unprecedented scale. The huge market and huge production gave birth to the giant glass manufacturers and suppliers of large-scale glass machine equipment and technology. There are majority of flat glass exhibitors on the Fair, which fully illustrates this point. The ultra-thin, Low-e and solar glass pushed flat glass to a new height. Compared to the larger and larger scales of flat glass exhibition (some exhibitors booth on the flat glass exhibition scale is no less than some of the major car manufacturers on the Shanghai Auto Show), the manufacturers on behalf of the container glass industry, it is almost negligible from its possession of the exhibition area and Hall (W1 and the corner of the W5) size. But the output value of containers jars industry manufacturers ranges from the hundreds of millions to several billion abound, whose executives and staff will come to visit the site on each exhibition, looking for development opportunities for the industry which is traditional and requires being modern.

Containers glass has complex process and higher requirements on the technical equipment

The wide variety of containers glass specifications forms a complex process and higher requirements on the technical equipment. In labor costs increase, energy and raw materials continuous increase and technical personnel interrupted case of urgency; the domestic enterprises are more intense for product upgrades and technical support. Domestic equipment manufacturers have made some efforts, which have trialed from suppress the technology to blow process and then the pressure blowing process automation, high-speed and high-quality glass beveling machine; for the product types, they produce cups, cutlery, glass brick, glass insulators and kinescope. However, compared to the maximum amount and the most traditional glass tableware and mechanisms glass crafts, the Bow of France and the Libby from United States not only occupy the world market but also occupies a high-end market in the domestic manufacturer and why? They have higher labor costs and the prices for raw materials and energy are the same. A major reason for this is their equipment: advanced technology and stable performance, which is the accumulation of few years' technology development and experience abroad.

The flat glass technology and glass edging machine manufacturers on the Glass Fair (such as: North Glass million sea, etc.) can give us inspiration, their capital investment, incentives, personnel training and technology accumulation obtain a world-class technical equipment, so they attracted guests and users from around the world, which makes the glass exhibition has a worldwide status. While the top company Olivetti of containers glass technical equipment integrated ANTASLYNCHLINDER first-class company, and want to keep the world's leading. Let's cooperate with all enterprises social and personal who are interested in glass machinery, and continue to accumulate, and make efforts to make glass utensils ultimately into the world, making China International Glass Industrial Technical Exhibition to be the world's largest glass exhibition and to be the world's center to comprehensively display the glass industry technology and equipment.

This article come from: http://www.gazoviepliti.info/uncategorized/opportunities-and-challenges-of-glass-machinery.htm

Glass Edging Machine Categories

Glass edging machine is one of the glass machine and equipments which has been used for glass processing for the longest time with the maximum applications. It’s mainly applied for glass edging and making some specific forms. Perform the glass edging machine in a correct and reasonable way can both ensure the smooth production and extending the service life of the machine. The glass edging machine is mainly divided into three types - single-arm contour milling machine, straight line edging machine and mold milling machine.

Glass milling machine is mainly suitable for the processing of furniture glass, architectural glass as well as artificial glass. It is one of the machinery and equipments which has been used for cold glass processing for the longest time with the maximum applications. It’s mainly applied for the grinding and polishing of ordinary plat glass bottom and chamfer. The machine is usually equipped with manual controller, digital controller and PLC computer controller. In order to ensure the normal performance of the machine, extend the service life of the machine as well as improve the processing and productivity, we need to perform the machine in a reasonable way and ensure daily cleaning, lubrication and maintenance.

Glass edging machine has three characteristics: Firstly it has single usage which is the grinding various kinds of straight lines; secondly it can work for grinding and polishing constantly so as to improve the productivity; thirdly it can grind and polish the flat glass with bigger size.

Commonly, the single side glass edging machine consists of the host (base + column + front and rear beam + grinding wheel tank + motor + electric boxes), feeder rail, and glass support frame as well as floor water tank. The machines with different materials and motors have different precisions and service lives of the machine. For example, as for the base for the ordinary single side grinding machine, their front and rear beam can strengthen the mechanical rigidity with their casting processed through quenching treatment and their ordinary service life is ten to fifteen years.

Glass edging polishing machine is a small new edging machine with multi functions, which can be used for lighting and power production. It is easy to perform the machine with good effects of edging. The item is an efficient, practical, inexpensive and durable product, and is one of the products with higher cost performance on the glass edging machine market. It is capable of grinding and polishing the straight edge, round edge, shaped edge, triple duckbill edge, slope edge, wave edge as well as ladder edge, getting the job done through twice polishing. It truly is the ideal edging equipment for the glass products such as frameless glass doors, glass coffee table as well as glass processing products. In particular, it is suitable for being applied in the glass shop and furniture factory.