The Current Situation of Gas Stove Industry
China gas stove has got rapid development in the past 20 years, and with development of economy, the ordinary households in China gradually make higher requirements in production quality. Small kitchen appliances spread into the consumer's home with its image of energy-saving, environmental protection, healthy and it is gradually gaining consumers' recognitions. In recent years, the infrared Gas stove's sudden emergence attracts customers' attetions with its outstanding characteristics, such as energy-saving, environmental protection, strong firepower without smoking the pot.
Analysis of Gas Oven Parts Industry
The key to do business is to develop the industry, if you have not reached the height, then you cannot prolong the length of the corporate life. The first step to develop market is to create the trend, because you cannot make the depth and breadth of the market, if there is no basis for consumer trends and resource gathering. Gas stove parts industry is an industry segments, and the market size is relatively small, but we should also see small products can be made into a big market and the development of the gas stove parts industry is also promising. There is no doubt that the development of the gas stove parts industry is to grasp the rise and fall of the industry life cycle and industry resources flow time, rhythm and spatial layout. At present, most parts of China have completed initial popularity of the medium and low gas oven, but the high, low different grades of products in the market of the regional distribution of the differences and the sales volume differences are very obvious. As the parts industry is in a subordinate position, by the pattern of the whole industry is very large, but also by the upstream industries such as suppliers of raw materials and hardware processing extrusion, belongs to survive in the cracks of the state. The industry is quite a mixed bag, and the number of enterprises certified by qualified suppliers is much smaller than the number of general practitioners. Future opportunities belong to those enterprises who can grasp the trend and improve ability and strategic layout initiatively.
Existing Problems in Gas Oven Industry
Our gas stove industry started earlier, but the technical development is very slow. In recent years, there are no national energy efficiency standards or energy-efficiency labeling in gas oven industry. Industry experts point out, although the gas stove is not a technology industry with high threshold, or a lot of stagnant water barriers. Stove on the overall performance requirements are higher. Gas stoves have to not only meet the basic safety and energy saving properties, but also have the characteristics of the fierce fire, sparking convenient, durable.
This article is come from:
http://www.soundspeakers.cn/index.php/analysis-of-gas-oven-industry.htm
Showing posts with label gas oven. Show all posts
Showing posts with label gas oven. Show all posts
Monday, October 8, 2012
Monday, September 24, 2012
Methods to Maintain Gas Oven
Importance of Maintain Gas Oven
In the modern kitchen cooking equipment, we usually place more emphasis on cleaning and maintenance of hood, while the maintenance of the electronic gas stove will be ignored. In fact, this is a wrong concept: regular maintenance gas oven can not only make kitchen environment more hygienic, flame burning more fully, reduce indoor air pollution, but also can reduce potential accidents, to put an end to the phenomenon of "burn the black bottom of the pot" and we even can say that the importance of the electron gas stove maintenance is higher than the maintenance of the hood machine.
Methods to Maintain Gas Oven
There are not too many people able to answer the problem of how to care for gas stove correctly, so this article will give details of the method to clean and maintain the gas stove, I hope everyone master the method of maintenance and cleaning of Electric Oven. Firstly, eliminate hidden dangers: before cleaning and maintenance of electronic gas stove, we have to check whether there are potential causes of accidents of the stove. The following parts have to be examined for a long period of use of gas oven. We have to observe whether the burning is adequate in the process of day-to-day use combustion, whether there exists burning smell, and if there are these phenomenons, you need to carry out clean-up work for the next step. When the combustion flame becomes red, smaller or gives out odor, gas stove should be cleaned timely. Clean the burner with cleaning brush, toothpick, wire or the carbon deposition attached to burner, and usually you can solve the problem after cleaning them up. Observe whether the intake hose of natural gas (or gas, liquefied petroleum gas) are aging, stiff and breakage. Observe whether there is leaking in gas (or gas, liquefied petroleum gas) intake hose by smearing soapy water; observe whether there are aging or rust in other parts of gas stove, if there is, you should better contact manufacturers to maintain and replace these parts, it is better not to dismantle or unload gas stove accessories by yourself to avoid a greater accident risk because of the lack of knowledge.
Methods to Clean Gas Oven
When clean the electron gas stove, whichever materials the gas stove panel belongs to, it is better to use a neutral detergent for cleaning, and we should pay attention that : Be sure to use a clean, soft cotton cloth (or special cleaning cloth) with the use of detergents, even in the face of stubborn dirt, we can thoroughly remove dirt by local infiltration, local repeated scrubbing instead of using a steel ball, cut shovel and other hard objects, in order to avoid scratches or even breakage phenomena of the gas stove panel.
This article is come from:http://www.soundspeakers.cn/index.php/methods-to-maintain-gas-oven.htm
In the modern kitchen cooking equipment, we usually place more emphasis on cleaning and maintenance of hood, while the maintenance of the electronic gas stove will be ignored. In fact, this is a wrong concept: regular maintenance gas oven can not only make kitchen environment more hygienic, flame burning more fully, reduce indoor air pollution, but also can reduce potential accidents, to put an end to the phenomenon of "burn the black bottom of the pot" and we even can say that the importance of the electron gas stove maintenance is higher than the maintenance of the hood machine.
Methods to Maintain Gas Oven
There are not too many people able to answer the problem of how to care for gas stove correctly, so this article will give details of the method to clean and maintain the gas stove, I hope everyone master the method of maintenance and cleaning of Electric Oven. Firstly, eliminate hidden dangers: before cleaning and maintenance of electronic gas stove, we have to check whether there are potential causes of accidents of the stove. The following parts have to be examined for a long period of use of gas oven. We have to observe whether the burning is adequate in the process of day-to-day use combustion, whether there exists burning smell, and if there are these phenomenons, you need to carry out clean-up work for the next step. When the combustion flame becomes red, smaller or gives out odor, gas stove should be cleaned timely. Clean the burner with cleaning brush, toothpick, wire or the carbon deposition attached to burner, and usually you can solve the problem after cleaning them up. Observe whether the intake hose of natural gas (or gas, liquefied petroleum gas) are aging, stiff and breakage. Observe whether there is leaking in gas (or gas, liquefied petroleum gas) intake hose by smearing soapy water; observe whether there are aging or rust in other parts of gas stove, if there is, you should better contact manufacturers to maintain and replace these parts, it is better not to dismantle or unload gas stove accessories by yourself to avoid a greater accident risk because of the lack of knowledge.
Methods to Clean Gas Oven
When clean the electron gas stove, whichever materials the gas stove panel belongs to, it is better to use a neutral detergent for cleaning, and we should pay attention that : Be sure to use a clean, soft cotton cloth (or special cleaning cloth) with the use of detergents, even in the face of stubborn dirt, we can thoroughly remove dirt by local infiltration, local repeated scrubbing instead of using a steel ball, cut shovel and other hard objects, in order to avoid scratches or even breakage phenomena of the gas stove panel.
This article is come from:http://www.soundspeakers.cn/index.php/methods-to-maintain-gas-oven.htm
Sunday, September 9, 2012
Historical Development of Gas Oven
Beginning Stage of Gas Stove
The year before 1980 is the initial stage of gas oven, at that time, the gas oven is simple in structure, and the function is single. Before the 1980s, the development of gas industry in China is still relatively backward, the penetration of city gas is very low, only some city families use gas cookers, as for the vast rural areas, there is almost no one using the gas oven. At that time, the gas cookers are still in its infancy, the product structure is simple, single function. Previously, among the gas appliances, there is only the most simple gas stove, and the product structure is also very simple. The stove surface materials are mostly cast iron, surface plating or spray treatment, no electric ignition process in a relatively primitive state.
Development Stage of Gas Oven
During the development stage of gas oven, the durability and reliability is greatly improved. After 1980, with the deepening of reform and opening up policy, the market economy appears, the rise of a wide range of gas appliances have entered into China from abroad, and the gas appliances production enterprise soared to nearly a dozen, and the types of business of gas companies are also developed from a single development type of state-owned, collective, private and other enterprises, well-known foreign gas appliance manufacturers are also looking for partners in China, so the product quality and appearance of gas appliances, gas stoves also have fundamental changes in product variety and functionality is also changing. During this period, the panel, combustion system, the ignition device has also been improved. Cold plate spray panel material burner cast iron burner, surface plating or spray zinc processing ignition device using piezoelectric electronic ignition, increased firing rate, the durability and reliability of gas stoves has been improved.
Breakthrough Stage of Gas Stove
The year from 1990 to 2006 is the breakthrough stage of gas stove. The variety and style increased. After 1990, China and the world economy have entered a rapid development stage. Gas and gas appliance industry has entered a period of rapid growth. The introduction of foreign advanced gas appliance manufacturing technology development, and bring about a breakthrough in China. The gas appliance career changed. Varieties increased domestic gas with fashionable, enhanced security measure, material, function and performance are improved. In production quality and reliability, and the level of technology, automation and degree of intelligence, performance indicators advanced, energy-saving and environmental protection, safe use are also improved.
This article is come from: http://www.soundspeakers.cn/index.php/historical-development-of-gas-oven.htm
The year before 1980 is the initial stage of gas oven, at that time, the gas oven is simple in structure, and the function is single. Before the 1980s, the development of gas industry in China is still relatively backward, the penetration of city gas is very low, only some city families use gas cookers, as for the vast rural areas, there is almost no one using the gas oven. At that time, the gas cookers are still in its infancy, the product structure is simple, single function. Previously, among the gas appliances, there is only the most simple gas stove, and the product structure is also very simple. The stove surface materials are mostly cast iron, surface plating or spray treatment, no electric ignition process in a relatively primitive state.
Development Stage of Gas Oven
During the development stage of gas oven, the durability and reliability is greatly improved. After 1980, with the deepening of reform and opening up policy, the market economy appears, the rise of a wide range of gas appliances have entered into China from abroad, and the gas appliances production enterprise soared to nearly a dozen, and the types of business of gas companies are also developed from a single development type of state-owned, collective, private and other enterprises, well-known foreign gas appliance manufacturers are also looking for partners in China, so the product quality and appearance of gas appliances, gas stoves also have fundamental changes in product variety and functionality is also changing. During this period, the panel, combustion system, the ignition device has also been improved. Cold plate spray panel material burner cast iron burner, surface plating or spray zinc processing ignition device using piezoelectric electronic ignition, increased firing rate, the durability and reliability of gas stoves has been improved.
Breakthrough Stage of Gas Stove
The year from 1990 to 2006 is the breakthrough stage of gas stove. The variety and style increased. After 1990, China and the world economy have entered a rapid development stage. Gas and gas appliance industry has entered a period of rapid growth. The introduction of foreign advanced gas appliance manufacturing technology development, and bring about a breakthrough in China. The gas appliance career changed. Varieties increased domestic gas with fashionable, enhanced security measure, material, function and performance are improved. In production quality and reliability, and the level of technology, automation and degree of intelligence, performance indicators advanced, energy-saving and environmental protection, safe use are also improved.
This article is come from: http://www.soundspeakers.cn/index.php/historical-development-of-gas-oven.htm
Subscribe to:
Posts (Atom)