Prices of Imported Second-hand Excavator
Price of imported second-hand excavator is obviously not fixed. In fact, no matter what kind of commodities, their prices are not a long time fixed in the same position. Especially like the imported second-hand excavators, such products come from abroad, and its price is bound to be the impact of national policies as well as all aspects of the economy. Imported second-hand excavator has long been a focus of attention. Among them, the price of imported second-hand excavators each year is to be the focus of discussion topics. Price of imported second-hand excavator is high, even if the imported second-hand excavator parts are expensive. However, in opening-up policy as we gradually implemented, the price of imported second-hand excavator also changed. Compared with before, now imported second-hand excavator price is a very reasonable. After a period of time, the domestic and international economic exchanges will be more closely, the price of imported second-hand excavator. There must have room to decline.
Cradle of Used Excavators
Follow the pace of the times, the advancement of technology and the technology developed in the new machine foothold in the domestic market, more and more people is not optimistic about that, that is because the longer shelf life of some second-hand machines and the economic cycle cause the phenomenon, the occurrence of this phenomenon is also some new machine manufacturers attention to a certain extent, so some used equipment development for some second-hand machines, but also with the development of second-hand products marketing link, the invisible problem exposed by the instability of the transaction, the shoddy, so that people are not familiar with some of the second-hand excavator market shouted deceived slowly that they are covered with a layer of black armbands to people psychologically. At this point, the one does better is China used excavator market.
How to Buy a Second-hand Excavator?
Check the excavator engine parts to make sure they are in good conditions, when throttle, to see whether the digging machines work properly and whether the smoky sound is abnormal, and hold your breath. At big effort of the pump, the engine is idling, the fuselage from the top, not the top from the pump when no effort or top engine sounds unusual for the lack of engine power. Throttle stretching all cylinder listen to large pump voice changed. Do the chain link and plate detection. Dial left and right, up and down the clearance check, allowing around a little gap, but up and down to die. Look at the number of vehicle replacement tubing, the less prove more new cars. The normal throttle speed check. All cylinders should be checked for injuries.
www.filtermanufacturers.net is one of the largest professional mechanical construction enterprises in China. Our company is specialized in producing, developing, and selling the whole range of Excavator Parts, such as all kinds of Filters, Alternators, Starters, Water Pumps, Cylinder Blocks, Cylinder Heads, Oil Covers, Oil Coolers, Oil Separators, Stepping Motors, Pistons & Piston Rings, Liners, Ignition Switches and Camshafts etc. Welcome to visit our website for more information!
This article is come from:
http://www.industrialmachinery4u.com/knowledge-of-used-excavators.htm
Showing posts with label excavator parts. Show all posts
Showing posts with label excavator parts. Show all posts
Sunday, December 30, 2012
Tuesday, July 31, 2012
How to identify commonly used Consumable Excavator Parts?
The identification method for the authenticity of excavator spare parts
There are many excavator manufacturers, so we should carry out investigations on the excavator manufacturer prior to purchase, the manufacturer must have perfect service system (including service distributors nationwide, excavator spare parts supply situation, service system during the guarantee period as well as maintenance work outside the guarantee period, etc.) to meet the construction units or individuals' equipment maintenance and repair needs after the purchase. During the operation of the excavator, using the pure excavator parts can reduce machine operating costs, which can also extend the service life, and ultimately to protect the vital interests of the consumers. In order to prevent consumers from being damaged by the misuse of non-genuine products, we will introduce the identification method for the authenticity of three-filter, bucket teeth and the nozzle frequently used equipment operation as follows:
The appearance identification methods of pure air filter excavator parts and counterfeit excavator parts:
First, the external steel mesh pitch of the pure air filter excavator spare parts is uniform, which is brushed with white rust-proof paint. The counterfeit excavator parts are often just ordinary steel mesh, and steel plate hole is sparse, which often has broken holes.
Second, the internal steel mesh at the welding surface of the pure is very uniform; and most of the counterfeit excavator spare parts using spot welding, overlapping steel mesh is longer and one side tilts. Fake air filter just imitates the geometric dimensions and appearance of the genuine products, which cannot reach the filter's requirements for engineering standards and the filter effect is greatly reduced.
Third, the filter color of pure excavator parts is milky white and with fine texture, the upper and lower lines are arranged in neat rows and has no deformation; counterfeit filter color is sulfur or other colors, paper and has rough texture, the up and down lines is limited by the assembly conditions, the filter is extruded and lines are bent. Poor filter is paper high ash bearing capacity, which will allow more impurities into the engine system, causing the engine to overhaul in advance.
The appearance identification methods for the genuine diesel filter excavator spare parts and counterfeit filter excavator spare parts:
First, The exterior pure excavator parts is bright, clean and coated and the fake one is dark in color, which is spotted due to poor shell steel plate.
Second, the bottom of the pure excavator spare parts is drilled uniform and the wire port is smooth; drilling layout of counterfeit excavator spare parts is asymmetry and there are glitches in the wire port. Burr or tiny metal impurities will go directly to the engine system if it exists, resulting in scratches and wear of precision excavator parts.
Third, the filter paper head and tail of pure excavator parts is bonded with the metal clamp bands while the fake ones generally use staples or stitching. The majority of counterfeit filters have the problem of short-circuit, and impurities going directly into the engine system without the filter paper, the reason is that the head and tail of filter paper is not firmly bonded, whose hazard is very serious.
There are many excavator manufacturers, so we should carry out investigations on the excavator manufacturer prior to purchase, the manufacturer must have perfect service system (including service distributors nationwide, excavator spare parts supply situation, service system during the guarantee period as well as maintenance work outside the guarantee period, etc.) to meet the construction units or individuals' equipment maintenance and repair needs after the purchase. During the operation of the excavator, using the pure excavator parts can reduce machine operating costs, which can also extend the service life, and ultimately to protect the vital interests of the consumers. In order to prevent consumers from being damaged by the misuse of non-genuine products, we will introduce the identification method for the authenticity of three-filter, bucket teeth and the nozzle frequently used equipment operation as follows:
The appearance identification methods of pure air filter excavator parts and counterfeit excavator parts:
First, the external steel mesh pitch of the pure air filter excavator spare parts is uniform, which is brushed with white rust-proof paint. The counterfeit excavator parts are often just ordinary steel mesh, and steel plate hole is sparse, which often has broken holes.
Second, the internal steel mesh at the welding surface of the pure is very uniform; and most of the counterfeit excavator spare parts using spot welding, overlapping steel mesh is longer and one side tilts. Fake air filter just imitates the geometric dimensions and appearance of the genuine products, which cannot reach the filter's requirements for engineering standards and the filter effect is greatly reduced.
Third, the filter color of pure excavator parts is milky white and with fine texture, the upper and lower lines are arranged in neat rows and has no deformation; counterfeit filter color is sulfur or other colors, paper and has rough texture, the up and down lines is limited by the assembly conditions, the filter is extruded and lines are bent. Poor filter is paper high ash bearing capacity, which will allow more impurities into the engine system, causing the engine to overhaul in advance.
The appearance identification methods for the genuine diesel filter excavator spare parts and counterfeit filter excavator spare parts:
First, The exterior pure excavator parts is bright, clean and coated and the fake one is dark in color, which is spotted due to poor shell steel plate.
Second, the bottom of the pure excavator spare parts is drilled uniform and the wire port is smooth; drilling layout of counterfeit excavator spare parts is asymmetry and there are glitches in the wire port. Burr or tiny metal impurities will go directly to the engine system if it exists, resulting in scratches and wear of precision excavator parts.
Third, the filter paper head and tail of pure excavator parts is bonded with the metal clamp bands while the fake ones generally use staples or stitching. The majority of counterfeit filters have the problem of short-circuit, and impurities going directly into the engine system without the filter paper, the reason is that the head and tail of filter paper is not firmly bonded, whose hazard is very serious.
Subscribe to:
Posts (Atom)