Elementary Knowledge of Packaging Machine

Overall of Packaging Machine Design

Simply put, the packaging machine is the machine to pack up products, and it plays a protection role and shows the beauty of the products. The packing machine is mainly divided into two aspects: 1. Overall production pipeline packaging. (2) the external packaging equipment. The overall production pipeline packaging is mainly used for the filling and sealing(bags, bottled) packaging in food, medicine, chemical industry. It mainly Includes liquid (paste) filling machine, pillow packing machine, powder particle machines, bag automatic packaging machine. The external packaging equipment peripheral packaging equipment is mainly used for the product produced, the spray (play) date of manufacture, sealing after the products are finished. It mainly includes filling machine, sealing machine, marking machine, packing machine, vacuum machine, shrink machine, vacuum packing machines and so on. China packaging machine is well-known in the world and has been exported to many countries over the world.

Classification of Packaging Machines

There are a wide range of packaging machines, and there are also many classification methods. Starting from different points of view can have a variety classifications, by sub-state, it can be liquid, massive, granular packaging machine; divided by the role of packaging function, there are inner and outer packaging machine; by the packaging industry, it can be food, household chemical, textile, and other packaging machines, such as the candy packaging machine belongs to the food packaging machine; by the packers points, it can be single-station, multi-station packaging machine; if divided by the degree of automation, it can be semi-automatic and automatic packaging machines.

Packaging Machine Troubleshooting methods

Usually, the electromagnet does not pull is mostly likely because this failure is the host of an internal fault, the electromagnet coil blown, circuit interruption and so on, the solution is: The first check is to host internal or external problems; Second is to view the solenoid fuse, view the electromagnet if has the energized signs, excluding mechanical jamming, internal power supply is detected in all normal circumstances; this failure is often encountered in weighing and packing machines and the reasons are: the sensor is damaged. the failure of the bridge voltage, wrong line connection or the line is interrupt, the solutions are: check the load signal of the detection sensor and the connection or the host’s load signal, near the detection for the bridge and amplifier circuit or computer output display circuit, sometimes the system stability is bad will also cause bagged the amount of instability, to solve this problem you can test whether the line is failure or to remove the host, to impose a clear signal through an internal short, to determine the fault is in the machine or from the switch, and then solve the problem.

This article is come from: http://www.gazoviepliti.info/packing-machine/elementary-knowledge-of-packaging-machine.htm